No. 567 V-Block and Clamp, 1 5/16 in Capacity
- Can be used on its base, on the end, or on either side
- The clamp is smaller than the outside width of the block, but has an adjustable side screw to support the block and prevent tilting
- The V at the stepped end is at right angles to the base and is handy for holding shouldered studs, pins, etc.
- A clearance hole for drilling or removing dowel pins is provided in the block
- The block has four 3/8-16 tapped holes
- The block is hardened and precision ground
Specifications
UNSPSC Code
31162900
Weight
2.1lb
Brand
L.S. Starrett
Capacity [Nom]
1 5/16 in
Category
Clamps & Spreaders
Wt.
2.1 lb
