0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
Specialty Profiles
 

Harvey Tool's fully stocked product offering of solid carbide Back Chamfer Cutters offers a low profile design with multiple flutes and greater radial projection. This tool is optimized for generating chamfered features on the backside of small holes, resulting in improved part finishes.

  • Low profile design and greater radial projection ideal for generating chamfered features on the backside of small holes or slots
  • Decrease costs by avoiding time-consuming changes to part set-ups
  • Slightly undersized to fit in common hole sizes
  • 90° included angle, cutting on angle only
  • Left hand shear flute / right hand cut evacuates chip away from part
  • Multiple flutes for improved finish
  • Solid carbide
  • CNC ground in the USA  
Undercutting Undercutting
Deburring Deburring
Chamfering Chamfering

Chamfer Cutters - Back Chamfer Cutters

104 items found
Sort by
0.2500" (1/4) Head DIA x 0.0440" LOC x 0.6250" (5/8) Neck Length x 45° per side Carbide Back Chamfer Cutter, 5 Flutes
0.2500" (1/4) Head DIA x 0.0440" LOC x 0.6250" (5/8) Neck Length x 45° per side Carbide Back Chamfer Cutter, 5 Flutes, AlTiN Coated
0.2100" Head DIA x 0.0370" LOC x 0.5000" (1/2) Neck Length x 45° per side Carbide Back Chamfer Cutter, 5 Flutes
0.2100" Head DIA x 0.0370" LOC x 0.5000" (1/2) Neck Length x 45° per side Carbide Back Chamfer Cutter, 5 Flutes, AlTiN Coated
0.1150" Head DIA x 0.0200" LOC x 0.1090" (7/64) Neck Length x 45° per side Carbide Back Chamfer Cutter, 4 Flutes
0.1150" Head DIA x 0.0200" LOC x 0.1090" (7/64) Neck Length x 45° per side Carbide Back Chamfer Cutter, 4 Flutes, AlTiN Coated
0.0800" Head DIA x 0.0140" LOC x 0.0700" Neck Length x 45° per side Carbide Back Chamfer Cutter, 4 Flutes
0.0800" Head DIA x 0.0140" LOC x 0.0700" Neck Length x 45° per side Carbide Back Chamfer Cutter, 4 Flutes, AlTiN Coated
0.1350" Head DIA x 0.0240" LOC x 0.1250" (1/8) Neck Length x 45° per side Carbide Back Chamfer Cutter, 5 Flutes
0.1350" Head DIA x 0.0240" LOC x 0.1250" (1/8) Neck Length x 45° per side Carbide Back Chamfer Cutter, 5 Flutes, AlTiN Coated
0.3120" (5/16) Head DIA x 0.0550" LOC x 0.2810" (9/32) Neck Length x 45° per side Carbide Back Chamfer Cutter, 6 Flutes
0.3120" (5/16) Head DIA x 0.0550" LOC x 0.2810" (9/32) Neck Length x 45° per side Carbide Back Chamfer Cutter, 6 Flutes, AlTiN Coated
Total 104 products
show per page
SEARCH ×

Search